USAGE
It is a type of garment film cut to your own design using a cutter or scissor then apply onto the fabric with a heat press machine.
APPLICATION INSTRUCTIONS
1.Draw the numbers or letters on the protective paper and cut them using the scissor or cutter.
2.Remove the protective film from the back(then, dry adhesive appears).
3.Place the reflective film on your fabric products, such as sports jersey or school uniform, then cover it with a cloth and press it firmly with hot iron at 165℃ for 10seconds.(take care to keep the dry adhesive side to contact the fabric)
4.Remove the protective film from the fabric after making sure the fabric is completely cooled down. Do not remove the protective film when the fabric is still warm.
5.Please test beforehand if the sufficient adhesion is obtained and also check if the fabric is damaged by heating.
